How to Install Screego with LEMP Stack on Debian 11
Screego is a screen sharing application for small teams or organizations. It allows you to share your screen with good quality and low latency. In this article, we are going to learn how to install Screego on Debian 11. So, let’s get started.
Checkout the Screego Project Here.
Try this wiki on our VPS. Starting at just $5/month with 24x7 In-house customer support.
Pre-requisites :
-
A system with Debian 11 installed and running.
-
root
access to the system. -
Let's Encrypt SSL installed, for this, you can refer to one of our guides on installing Let's Encrypt SSL on Debian.
-
Docker installed and running, for this, you can refer to one of our guides on installing Docker on Debian 11.
- LEMP Stack installed and running, for this, you can refer to one of our guides on installing LEMP Stack (Nginx, MariaDB, and PHP).
Once you're all set, we'll proceed with Screego installation and configuration.
Install Screego
Let us begin with starting docker container, and you are ready to go. Install screego using the below command
docker run --net=host -e SCREEGO_EXTERNAL_IP=CROWNCLOUD_EXTERNAL_IP screego/server:1.5.2
Replace
CROWNCLOUD_EXTERNAL_IP
with your external IP address.
Configuring Nginx vHost
Create a new Nginx configuration file dev2.domainhere.info.conf
for the domain with the following command:
vi /etc/nginx/sites-available/dev2.domainhere.info.conf
Add the following codes:
Change
dev2.domainhere.info
withYour Domain Name
and Change SSL Path according to your SSL Path.
upstream screego {
# Set this to the address configured in
# SCREEGO_SERVER_ADDRESS. Default 5050
server 192.169.7.180:5050;
}
server {
listen 80;
# Here goes your domain / subdomain
server_name dev2.domainhere.info;
listen 443 ssl; # managed by Certbot
ssl_certificate /etc/letsencrypt/live/dev2.domainhere.info/fullchain.pem; # managed by Certbot
ssl_certificate_key /etc/letsencrypt/live/dev2.domainhere.info/privkey.pem; # managed by Certbot
include /etc/letsencrypt/options-ssl-nginx.conf; # managed by Certbot
ssl_dhparam /etc/letsencrypt/ssl-dhparams.pem; # managed by Certbot
location / {
# Proxy to screego
proxy_pass http://screego;
proxy_http_version 1.1;
# Set headers for proxying WebSocket
proxy_set_header Upgrade $http_upgrade;
proxy_set_header Connection "upgrade";
proxy_redirect http:// $scheme://;
# Set proxy headers
proxy_set_header X-Real-IP $remote_addr;
proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
proxy_set_header X-Forwarded-Proto http;
# The proxy must preserve the host because screego verifies it with the origin
# for WebSocket connections
proxy_set_header Host $http_host;
}
}
Now, press the Esc
key, and type in :wq!
and press the Enter
key to save and exit the file.
Now, restart & check the Nginx with the following commands:
systemctl restart nginx
systemctl status nginx
Enable Firewall:
ufw allow 5050/tcp
ufw allow 80/tcp
ufw allow 443/tcp
Start using Screego
Now open the domain name from your browser, this will redirect you to the Screego application.
https://dev2.domainhere.info
Replace the
dev2.domainhere.info
with the actual IP or domain configured on the server.
Example screenshots for Screego:
Now you have successfully installed Screego with LEMP Stack on Debian 11.
CrownCloud - Get a SSD powered KVM VPS at $4.5/month!
Use the code WELCOME
for 10% off!
1 GB RAM / 25 GB SSD / 1 CPU Core / 1 TB Bandwidth per month
Available Locations: LAX | MIA | ATL | FRA | AMS